Electromagnetic adjustable speed drives and digital controls for true system efficiency and performance
Dynamatic® drive clutches on induction motors have been installed in wastewater treatment applications for many decades, primarily due to the inherent durability, simplicity, and reliability of Eddy Current technology. Even though adjustable frequency drives (VFDs) gained popularity in the 1980s… real-world experience at facilities worldwide has proven that only Dynamatic® can bring TRUE system efficiency to your operation. “True efficiency” is defined by three important cost factors: capital costs, energy costs, and cost of ownership.
Dynamatic® Salient Pole
Eddy Current Drive
Dynamatic® AT Vertical
Eddy Current Drive
Up to 65% less initial cost than VFDs in medium voltage applications
No ancillary costs for conditioning/cooling and harmonic suppression
Lower cost installation and commissioning due to less complex systems
Simple to use digital control integration
Electronics are 60-70% smaller than comparable medium voltage VFDs
Dynamatic® drives use less energy to operate in than VFDs
Lower peak demand costs: no multiple, medium voltage motor starting/stopping
Capable of continuous operation in 40° C ambient temperature
Proven rugged and reliable electromagnetic clutch design
Outlast VFDs by as much as 6:1
Easy to maintain by on-site staff using low-cost parts
Unaffected by power quality fluctuations that can destroy VFDs
Video explaining how Dynamatic® Eddy Current electromagnetic drives work.
Save up to 65% on capital pump-drive system costs
For decades, Dynamatic® systems have outlasted and outperformed self-proclaimed “efficient” variable frequency drives in a wide range of medium voltage wastewater applications. In fact, a Dynamatic® Eddy Current pump drive system can save your municipality hundreds of thousands of dollars in capital costs alone. Savings are typically 50% to 60% compared to the initial cost of VFD systems in medium voltage applications.
Lowest energy costs for wastewater pumping applications
The operating efficiency of a Dynamatic® drive increases relative to the normal operating speed of a motor. This makes the Dynamatic® drive ideally suited to most wastewater pumping applications, which typically require controlled speed within the range of from 75% to 100% of the motor’s rated speed. In contrast, the operating efficiency of a adjustable frequency drive decreases across this range. In addition, VFD operating efficiency can be further diminished by added energy costs incurred by required ancillary VFD system components.
Minimize ownership costs with reduced maintenance, repairs and upgrades
Dynamatic® drives have been shown to outlast VFDs by as much as 6:1. Their rugged and proven reliable electromagnetic clutch design is highly tolerant of fluctuations in power quality. Unlike VFDs, Dynamatic® systems produce virtually no harmonic noise into your plant’s electrical system or onto the utility grid. By comparison, VFDs continue to be complex devices bearing higher ownership costs with shorter product life cycles. These significantly higher costs are attributable to quicker VFD product series obsolescence, faster parts obsolescence and earlier forced product replacements.
Achieve TRUE system efficiency with Dynamatic® Digital Controls
Dynamatic® EC-2000 Digital Controls are the perfect solution for new installations or retrofitting all brands of eddy-current drives. The EC-2000 control is a simple, versatile, digital, electromagnetic drive control featuring local and remote access to programmable run presets. The control is PLC and SCADA compatible, the outputs do not require separate external DC supply. Learn more about Dynamatic® EC-2000 controls.