Water challenge for 330,000 people solved by Dynamatic® Variable Speed Drives
To meet the growing demand for drinking water, the Village of Oak Lawn, Illinois booster station needed to expand. The location for the underground booster station was along a divided avenue through a residential neighborhood. Variable Frequency Drives (VFDs) could not be used because of the space and cooling requirements that would be needed within the confined area underground. These factors made selecting an Eddy Current Variable Speed Drive an easy solution to the problem. Eddy Current drives have a much smaller footprint, plus no costly cooling requirements or need for additional components such as harmonic migration.
Read more about this installation and the benefits of Dynamatic® Variable Speed Drives in this article posted on Empowering Pumps.
Dynamatic® hires Ron Dombrowski as Regional Sales Manager
Dynamatic® is proud to welcome Ron Dombrowski as the newest addition to our staff. Ron will take over the duties as Regional Sales Manager of South Central United States including: Texas, New Mexico, Oklahoma and Louisiana, overseeing EASA, PTDA, MRO & OEM, and Industrial Pumps, Fans, and Compressors sales.
Ron brings nearly 18 years of experience in the Industrial and Commercial Drive Market and has a BS in Electrical Engineering from Southern Illinois University. He is excited to bring his knowledge of Eddy Current Drives to the market of South Central United States.
Dynamatic/Drive Source International is the world’s leader manufacturer of Eddy Current variable speed drives, brakes and controls. For more information, contact Dynamatic at (800)548-2169.
Come see us at EASA 2017
Learn how Dynamatic® can grow your EASA business. Visit us June 25-27 at the EASA Convention, Booth 345, in the Tampa Convention Center.
Dynamatic® is more than just Eddy Current drives and controls. We also specialize in digital control upgrades, brakes, dynamometers, and high speed motors. With over 65,000 parts in stock, Dynamatic® can be your one stop shop. We look forward to working closely with your organization, expanding your opportunities and increasing sales with our line of multiple products.
For your chance to win a set of Titleist Golf Clubs, come visit us in Booth 345 and complete a short survey. The exhibit hall will be open during the following hours:
- Sunday, June 25 - 1:00 - 4:30 pm
- Monday, June 26 - 12:00 - 4:00 pm
- Tuesday, June 27 - 9:00 am - 12:00 pm
Dynamatic® hires Keith Plowman as Regional Sales Manager
Dynamatic® is proud to welcome Keith Plowman as the newest addition to our staff. Keith will take over the duties as Regional Sales Manager overseeing EASA, PTDA, MRO & OEM sales in seven states including: Wisconsin, Illinois, Indiana, Michigan, Ohio, Kentucky and Tennessee.
Keith brings nearly 35 years of experience in the Industrial and Electrical Commercial Market and has a BA in Business Management from Lewis University. He is looking forward to sharing his knowledge of the industry with our customers.
Dynamatic® celebrates Hydraulic Institute Centennial in Orlando, FL
In March Dynamatic® traveled to Orlando, Florida to attend the Hydraulic Institute’s Annual Conference and Centennial Celebration. While there Dynamatic® attended keynote presentations on the future of the pump industry. The conference was also celebratory as all members received a commemorative Hydraulic Institute 100 Years of the Pump Industry book. The book contained a timeline of the pump industry, and many members’ milestones. Included in the book from 1958 was a Dynamatic® installation of 3 variable speed drives at a sewer pumping station in Venice, California. These pump industry milestones were also on display at the conference. The conference ended with Dynamatic® as one of the sponsors of the Hydraulic Institutes golf outing.
Presentation at MWEA Wastewater Administrators Conference
Dynamatic’s Gary Patterson gave a 45-minute presentation during the MWEA event held in January 2017. Patterson discussed the topic of one of his recently published articles on tying carbon emission reduction to saved energy at “negative costs”. The discussion concentrated on climate change and finding ways to reduce or eliminate emissions of greenhouse gases, most notably CO2. The presentation emphasized how to easily save energy in wastewater treatment with “optimal speed” or “high efficiency” pumping by using variable speed systems.
3-Part Webinar: Wastewater Pumps – Feb. 16/21/23
Dynamatic® is excited to work with the Hydraulic Institute, presenting session two of a 3-part webinar series on Wastewater Treatment Plant Pumps. The series begins Thursday, February 16th at 1:00pm ET. Our very own Joe Witts will serve as a subject matter expert and instruct session 2. “Pump Requirements for Plant Operators” on February 21st.
Registration is normally $279 per registrant and includes a complimentary, downloadable PDF copy of the Wastewater Treatment Plant Pumps Guidelines for Selection, Application and Operation guidebook (retail $175). The Hydraulic Institute has provided a special registration fee of $209.25 (25% off) for Dynamatic contacts by using the link https://goo.gl/YRX6lJ.
We’re Coming to an Event Near You!
Check you calendar and make your plans to come see us… learn firsthand how variable speed pump, fan & compressor applications are best served by Dynamatic® drives, brakes and controls at one of the following industry shows:
UPCOMING EVENTS 2017
- METALFORM Mexico • Monterrey Mexico • May 2-4 • Booth 3509
- EASA Convention • Tampa Florida • June 25-27 • Booth 345
- WEFTEC • Chicago Illinois • October 2-4 • Booth 1050
- FABTECH • Chicago Illinois • November 6-9 • Booth A5052•
Thank you to everyone who came to see us in Las Vegas! FABTECH 2016 at the Las Vegas Convention Center was another great show. Visitors completed our brief survey, entered to win a set of Titleist golf clubs, and then saw how our drives can keep their business running strong.
Our thanks to everyone that visited us at WEFTEC 2016
Water professionals from all over North America helped make this years show a huge success. It is our commitment to solve the challenges you face in the water industry by producing energy efficient variable speed drives with the longest life cycle available. We look forward to serving your needs.
Empowering Pumps WEFTEC Party
We all had a great time cosponsoring the Empowering Pumps party at Fulton Alley in New Orleans during WEFTEC 2016. It was great to bowl a few frames while talking to colleagues about the water industry. The turnout was impressive, and we can't wait to partner with Empowering Pumps for future events.
And the winner at WEFTEC is...
Nick Szoke, senior wastewater engineer at Stantec in Alberta Canada, won a set of Titleist Golf Clubs by entering our promotion at the Dynamatic booth... may he forever hit them long and straight. You too can make your drives go longer. Dynamatic® drives systems outlast and outperform VFD systems with lower installation cost, no harmonic noise and a 40-60 year life span.
Dynamatic® at WEFTEC 2015 in Chicago, IL
Dynamatic® the world leader in eddy current adjustable speed drive technology, would like to announce that once again, we will be exhibiting at WEFTEC.
WEFTEC®, the Water Environment Federation's Annual Technical Exhibition and Conference, is the largest conference of its kind in North America and offers water quality professionals from around the world with the best water quality education and training available today. Recognized as the largest annual water quality exhibition in the world, the expansive show floor provides unparalleled access to the most cutting-edge technologies in the field; serves as a forum for domestic and international business opportunities; and promotes invaluable peer-to-peer networking between its more than 22,000 attendees.
This year we are located in Booth 2800, South Building - McCormick Place. WEFTEC 2015 Exhibition hours are 8:30 am to 5:00 pm on Monday, Tuesday and Wednesday, September 28 – 30, 2015.
Please stop by our booth and see our full line of eddy current drives, brakes & clutches, as well as a demonstration of our brand new EC-2000 digital controller with Ethernet/IP technology.
UPCOMING EVENTS 2015: Dynamatic® trade show schedule
See how adjustable speed applications are best served by Dynamatic® drives, brakes and controls at one of the following industry shows:
- Metalform Mexico – Monterrey, Mexico – May 5-7, 2015
- EASA Convention – San Antonio, TX – Booth 112 – June 14-16, 2015
- WEFTEC – Booth 2800 – September 26-30, 2015
- FABTECH – Booth S4507 – November 9-12, 2015
Busy booth at WEFTEC 2013
Dynamatic® enjoyed high volume booth traffic this year at McCormick Place in Chicago as municipalities and engineers alike sought reliable and cost-effective solutions to America's aging infrastructure. Visitors were provided statistical data on the widespread dissatisfaction of VFDs, watched in-depth demonstrations on reliable Eddy Current technology and how it outperforms VFDs, and participated in the latest survey designed to build awareness for the true alternative to VFDs... Dynamatic® adjustable speed drives and digital controls.
Dynamatic® trade show schedule 2013
Dynamatic® Eddy Current drives, brakes and controls serve a world of adjustable speed applications. Join us at one of the following industry shows:
- Metalform Mexico – Monterrey, Mexico – Booth 1841 May 7-9, 2013
- EASA Convention – Las Vegas, Nevada – Booth 111 – June 30 – July 2, 2013
- WEFTEC – Chicago, Illinois – Booth 1013 – October 7-9, 2013
- FABTECH – Chicago, Illinois – Booth S4238 – November 18-21, 2013
EASA Partner Program
Dynamatic® Genuine Parts are at the heart of satisfied customers. Learn how to best service Dynamatic® customers while benefitting the advantages our EASA partners receive. Give your business a competitive edge... it’s free, it’s fast, and it’s easy!
WEFTEC 2012: “Eddy Current drives outlast VFDs by as much as 6:1”
Dynamatic® electromagnetic drive systems provide true system efficiency for water and wastewater applications worldwide. Join us at WEFTEC booth 4501 and our engineering team will show you how to save up to 65% on drive system capital costs, achieve higher overall drive system operating efficiency, and realize the lowest lifetime cost of ownership.
Discover true system efficiency for your facility at the 85th Annual Water Environment Federation Technical Exhibition and Conference. The show runs from September 29th through October 3rd at the New Orleans Morial Convention Center.
EASA Convention 2012: “Eddy Current Drives Go Digital”
Monday June 25, 2012, Drive Source International, Inc. (DSI), manufacturer of Dynamatic® Eddy Current Drives, and Anthony Anniballi, Vice President, Sales & Marketing shared all the latest innovations and trends in digital Eddy Current controls. The EASA Convention & Exhibition ran from June 24-26 in Nashville Tennessee.
Enhance the efficiency of your operations with Dynamatic® digital controls. Dynamatic® has you covered with sales, service and support. Learn more about our full line of Eddy Current digital controls.
METALFORM Mexico 2012: “Say goodbye to downtime with Dynamatic® Press Drivesl”
Drive Source International, Inc. (DSI), manufacturer of Dynamatic®, showcased the reliable performance and durability of Dynamatic® press drives and digital controls for variable speed stamping presses. Mexico’s “Mega Event” for metal forming, fabricating, finishing and welding show ran from May 2-4, 2012 at Centro Banamex in Mexico City.
Keep your business running strong with Dynamatic® OEM press drive sales, service and support. Drive Source International is your one-stop press drive source, offering application engineering, a broad range of high-quality press drives from .75HP to 1000HP, and a full line of controls. For more information on our press drive solutions, click here.
EVENTS in the Water and Wastewater market:
WRWA – Wisconsin Rural Water Association 2012 Annual Technical Conference
March 28-29, 2012.
IAWPCO –2012 Annual Conference Springfield, Illinois April 16-19, 2012.
FABTECH 2011: “Digital upgrades for metal forming & press stamping”
Drive Source International, Inc. (DSI), OEM of Dynamatic® digital controls and drives, showcased its full line of digital control upgrades at FABTECH. North America's largest metal forming, fabricating, finishing and welding show ran from November 14-17, 2011 at McCormick Place in Chicago, Illinois.
Drive Source International is your one-stop press drive source, offering application engineering, a broad range of high-quality press drives from .75HP to 1000HP, and a full line of controls. For more information on our press drive solutions, click here.
WEFTEC 2011: “True system efficiency comes to water/wastewater”
Drive Source International, Inc. (DSI), manufacturer of the Dynamatic® line of variable speed drives, brakes and controls, brought its message of true system efficiency to the 84th Annual Water Environment Federation Technical Exhibition and Conference. The show ran from October 17th through the 19th at the Los Angeles Convention Center.
Dynamatic® pump-drive systems are engineered to give you the most bang for your buck now and long-term. Our team showed visitors how to save up to 65% on capital pump-drive system costs, achieve higher overall system operating efficiency and realize the lowest lifetime cost of ownership.
Thanks to everyone who stopped by our booth and helped make WEFTEC 2011 a success for all. Congratulations to the winners of our Dynamatic® Bass Pro Shops Gift Card Giveaway Promotion.